Share:
The Kocsis Hand Pump HPA-300118 is a manually operated hydraulic hand pump manufactured by Kocsis Technologies, Inc. (KTI), designed for recharging hydraulic starting systems used in industrial engines, oil & gas equipment, marine machinery, and other heavy-duty applications. The HPA-300118 provides a reliable means of restoring hydraulic system pressure without requiring an external electrical or mechanical power source.
The Kocsis HPA-300118 hydraulic hand pump is particularly suited to hydraulic engine starting systems where manual pressure regeneration is required during emergency starting or black start conditions. By operating the hand lever, personnel can manually recharge the hydraulic system to support subsequent engine starting attempts.
Featuring an aluminum housing, stainless steel piston, and cold-rolled steel handle, the HPA-300118 is designed for a maximum allowable working pressure of 3,000 psi (207 bar). The pump delivers approximately 1.22 cubic inches (19.99 cm³) of hydraulic fluid per cycle and incorporates a manual bypass relief arrangement for hydraulic system operation.
KOCSIS
+1
STX Engineering Solutions supports oil & gas, drilling, offshore, marine, power generation, and industrial customers in Kemaman, Terengganu, Malaysia with the sourcing and supply of Kocsis hydraulic hand pumps, hydraulic starting system components, replacement parts, and related industrial equipment.
Key Features
- Manual Hydraulic Pump Operation – Allows operators to generate hydraulic pressure through manual lever operation without requiring electrical power or an external motor.
- 3,000 PSI Working Pressure – Designed for a maximum allowable working pressure of 3,000 psi (207 bar) in compatible hydraulic systems.
- Hydraulic Starting System Recharging – Designed to restore pressure in hydraulic engine starting systems, including emergency black start applications.
- High Displacement per Cycle – Delivers approximately 1.22 cubic inches (19.99 cm³) of hydraulic fluid per operating cycle.
- Aluminum Pump Housing – Features an aluminum housing for a lightweight and durable pump construction.
- Stainless Steel Piston – Incorporates a stainless steel piston for hydraulic pumping operation.
- Manual Bypass Relief – Equipped with a manually operated bypass relief arrangement.
- Hydraulic Sealing Components – Uses Buna-N O-ring seals and Teflon backup rings.
- SAE Hydraulic Connections – Features SAE #6 inlet and outlet connections for integration into compatible hydraulic systems.
- Serviceable Design – Replacement seal and service kits are identified under Kocsis part number KT-202565.
- Emergency Starting Applications – Provides a manual method of recharging hydraulic pressure when conventional powered recharging is unavailable.
Applications
The Kocsis HPA-300118 Hand Pump can be used in compatible hydraulic starting and pressure recharging applications, including:
- Oil & gas equipment
- Offshore drilling equipment
- Marine diesel engine starting systems
- Industrial diesel engines
- Hydraulic engine starting systems
- Emergency black start systems
- Generator engine starting systems
- Power generation equipment
- Hydraulic accumulator charging systems
- Industrial hydraulic power systems
- Oilfield machinery
- Marine and offshore equipment
- Engine starting system maintenance
- Hydraulic starting system servicing
The HPA-300118 is especially useful in installations where hydraulic starting pressure must be restored manually following pressure depletion or during emergency starting procedures.
Strumco
+1
Kocsis HPA-300118 Hand Pump Specifications
Description Specifications
Manufacturer Kocsis Technologies, Inc. (KTI)
Product Name Hydraulic Hand Pump
Model / Part Number HPA-300118
Pump Type Manual Hydraulic Hand Pump
Housing Material Aluminum
Piston Material Stainless Steel
Handle Material Cold-Rolled Steel
O-Ring Seals Buna-N
Backup Rings Teflon
Bypass Relief Manual
Maximum Working Pressure 3,000 psi (207 bar)
Displacement 1.22 in³ (19.99 cm³) per cycle
Operating Force at 3,000 psi 48.5 lbs (22 kgf approximately)
Weight (Excluding Handle) 5.8 lbs (2.63 kg)
Recommended Hydraulic Fluid MIL-H-5606 Red Hydraulic Fluid
Inlet Connection SAE #6
Outlet Connection SAE #6
Seal Kit Part Number KT-202565
Service Kit Part Number KT-202565
Specifications are based on published Kocsis HPA-300118 product documentation.
Amazon Web Services, Inc.
+1
Kocsis Hydraulic Starting System Components
Kocsis Technologies manufactures hydraulic starting equipment and related components for industrial engine starting applications. Depending on the system configuration, customers may require different hand pump assemblies, recharging pumps, and replacement components.
Common Kocsis hydraulic starting system products include:
- HPA-300118 Hand Pump – Aluminum housing manual hydraulic hand pump designed for hydraulic starting system recharging.
- HPA-308165 Hand Pump – Ductile iron version of the hydraulic hand pump for applicable system configurations.
- HPB-300141 Hand Pump Tank Assembly – Associated hand pump tank assembly for compatible hydraulic starting systems.
- KT-202565 Seal / Service Kit – Replacement sealing and servicing components for the HPA-300118 hand pump.
- Kocsis Recharging Pumps – Mechanically driven hydraulic pumps used to restore pressure in hydraulic engine starting systems.
The correct component should be selected according to the hydraulic starting system configuration, equipment manufacturer requirements, and existing part number.
Strumco
+1
Correct Product Identification
When sourcing the Kocsis Hand Pump HPA-300118, customers should verify the complete model number and technical requirements to ensure compatibility with the existing hydraulic starting system.
Important information includes the manufacturer, part number, pump housing material, maximum working pressure, hydraulic fluid specification, inlet and outlet connections, and installation configuration.
Customers should also confirm whether a complete hand pump assembly, replacement handle, seal kit, or individual hydraulic component is required.
A photograph of the existing Kocsis hand pump, together with its identification plate, equipment documentation, or hydraulic starting system model, can help ensure the correct replacement is identified.
Kocsis Hand Pump HPA-300118 Supplier in Malaysia
For companies looking for a Kocsis Hand Pump HPA-300118 supplier in Kemaman, Terengganu, Malaysia, STX Engineering Solutions can assist with sourcing Kocsis hydraulic hand pumps, 3,000 psi manual hydraulic pumps, hydraulic engine starting system components, seal kits, and specialized industrial spare parts.
STX Engineering Solutions supports customers across the oil & gas, offshore drilling, marine, power generation, petrochemical, industrial engine, and maintenance sectors with hydraulic equipment sourcing and procurement solutions.
Contact STX Engineering Solutions today with your Kocsis HPA-300118 hand pump requirements, part number, product photographs, quantity, or technical specifications to request a quotation for the correct hydraulic hand pump or replacement component.
The Kocsis HPA-300118 hydraulic hand pump is particularly suited to hydraulic engine starting systems where manual pressure regeneration is required during emergency starting or black start conditions. By operating the hand lever, personnel can manually recharge the hydraulic system to support subsequent engine starting attempts.
Featuring an aluminum housing, stainless steel piston, and cold-rolled steel handle, the HPA-300118 is designed for a maximum allowable working pressure of 3,000 psi (207 bar). The pump delivers approximately 1.22 cubic inches (19.99 cm³) of hydraulic fluid per cycle and incorporates a manual bypass relief arrangement for hydraulic system operation.
KOCSIS
+1
STX Engineering Solutions supports oil & gas, drilling, offshore, marine, power generation, and industrial customers in Kemaman, Terengganu, Malaysia with the sourcing and supply of Kocsis hydraulic hand pumps, hydraulic starting system components, replacement parts, and related industrial equipment.
Key Features
- Manual Hydraulic Pump Operation – Allows operators to generate hydraulic pressure through manual lever operation without requiring electrical power or an external motor.
- 3,000 PSI Working Pressure – Designed for a maximum allowable working pressure of 3,000 psi (207 bar) in compatible hydraulic systems.
- Hydraulic Starting System Recharging – Designed to restore pressure in hydraulic engine starting systems, including emergency black start applications.
- High Displacement per Cycle – Delivers approximately 1.22 cubic inches (19.99 cm³) of hydraulic fluid per operating cycle.
- Aluminum Pump Housing – Features an aluminum housing for a lightweight and durable pump construction.
- Stainless Steel Piston – Incorporates a stainless steel piston for hydraulic pumping operation.
- Manual Bypass Relief – Equipped with a manually operated bypass relief arrangement.
- Hydraulic Sealing Components – Uses Buna-N O-ring seals and Teflon backup rings.
- SAE Hydraulic Connections – Features SAE #6 inlet and outlet connections for integration into compatible hydraulic systems.
- Serviceable Design – Replacement seal and service kits are identified under Kocsis part number KT-202565.
- Emergency Starting Applications – Provides a manual method of recharging hydraulic pressure when conventional powered recharging is unavailable.
Applications
The Kocsis HPA-300118 Hand Pump can be used in compatible hydraulic starting and pressure recharging applications, including:
- Oil & gas equipment
- Offshore drilling equipment
- Marine diesel engine starting systems
- Industrial diesel engines
- Hydraulic engine starting systems
- Emergency black start systems
- Generator engine starting systems
- Power generation equipment
- Hydraulic accumulator charging systems
- Industrial hydraulic power systems
- Oilfield machinery
- Marine and offshore equipment
- Engine starting system maintenance
- Hydraulic starting system servicing
The HPA-300118 is especially useful in installations where hydraulic starting pressure must be restored manually following pressure depletion or during emergency starting procedures.
Strumco
+1
Kocsis HPA-300118 Hand Pump Specifications
Description Specifications
Manufacturer Kocsis Technologies, Inc. (KTI)
Product Name Hydraulic Hand Pump
Model / Part Number HPA-300118
Pump Type Manual Hydraulic Hand Pump
Housing Material Aluminum
Piston Material Stainless Steel
Handle Material Cold-Rolled Steel
O-Ring Seals Buna-N
Backup Rings Teflon
Bypass Relief Manual
Maximum Working Pressure 3,000 psi (207 bar)
Displacement 1.22 in³ (19.99 cm³) per cycle
Operating Force at 3,000 psi 48.5 lbs (22 kgf approximately)
Weight (Excluding Handle) 5.8 lbs (2.63 kg)
Recommended Hydraulic Fluid MIL-H-5606 Red Hydraulic Fluid
Inlet Connection SAE #6
Outlet Connection SAE #6
Seal Kit Part Number KT-202565
Service Kit Part Number KT-202565
Specifications are based on published Kocsis HPA-300118 product documentation.
Amazon Web Services, Inc.
+1
Kocsis Hydraulic Starting System Components
Kocsis Technologies manufactures hydraulic starting equipment and related components for industrial engine starting applications. Depending on the system configuration, customers may require different hand pump assemblies, recharging pumps, and replacement components.
Common Kocsis hydraulic starting system products include:
- HPA-300118 Hand Pump – Aluminum housing manual hydraulic hand pump designed for hydraulic starting system recharging.
- HPA-308165 Hand Pump – Ductile iron version of the hydraulic hand pump for applicable system configurations.
- HPB-300141 Hand Pump Tank Assembly – Associated hand pump tank assembly for compatible hydraulic starting systems.
- KT-202565 Seal / Service Kit – Replacement sealing and servicing components for the HPA-300118 hand pump.
- Kocsis Recharging Pumps – Mechanically driven hydraulic pumps used to restore pressure in hydraulic engine starting systems.
The correct component should be selected according to the hydraulic starting system configuration, equipment manufacturer requirements, and existing part number.
Strumco
+1
Correct Product Identification
When sourcing the Kocsis Hand Pump HPA-300118, customers should verify the complete model number and technical requirements to ensure compatibility with the existing hydraulic starting system.
Important information includes the manufacturer, part number, pump housing material, maximum working pressure, hydraulic fluid specification, inlet and outlet connections, and installation configuration.
Customers should also confirm whether a complete hand pump assembly, replacement handle, seal kit, or individual hydraulic component is required.
A photograph of the existing Kocsis hand pump, together with its identification plate, equipment documentation, or hydraulic starting system model, can help ensure the correct replacement is identified.
Kocsis Hand Pump HPA-300118 Supplier in Malaysia
For companies looking for a Kocsis Hand Pump HPA-300118 supplier in Kemaman, Terengganu, Malaysia, STX Engineering Solutions can assist with sourcing Kocsis hydraulic hand pumps, 3,000 psi manual hydraulic pumps, hydraulic engine starting system components, seal kits, and specialized industrial spare parts.
STX Engineering Solutions supports customers across the oil & gas, offshore drilling, marine, power generation, petrochemical, industrial engine, and maintenance sectors with hydraulic equipment sourcing and procurement solutions.
Contact STX Engineering Solutions today with your Kocsis HPA-300118 hand pump requirements, part number, product photographs, quantity, or technical specifications to request a quotation for the correct hydraulic hand pump or replacement component.
Inquiry - Kocsis Hand Pump ( HPA-300118)
